Rabo LED curing light

205

The rabo LED curing light is a pen-style, high-power output, cordless light polymerization device for use in dentistry.
rabo LED curing light is characterized by,
•    Small size (pocket size) low weight ergonomic design.
•    Interchangeable multi purpose tips

Category:

Description

The rabo LED curing light is a pen-style, high-power output, cordless light polymerization device for use in dentistry.
rabo LED curing light is characterized by,
•    Small size (pocket size) low weight ergonomic design.
•    Interchangeable multi purpose tips

Tips

•    “It’s all in the head”, they say.  The rabo system has interchangeable color coded Tips for different tasks.  Connecting a certain ‘task tip’ creates a different duration, optical curing zone and intensity for your convenience.

•    Step-up tip emits 5 seconds of 50% intensity and another 10 seconds of 100% intensity.  Collimated light effective to ~10 mm distance. Polymerization area of 8.5 mm in diameter. 12° angulation of light probe for optimum access.  Peak wavelength is 460 nm.

•    Veneer tip emits a 3mm light beam for 3 seconds.

•    White light tip.  The rabo can be used as a dental mirror with light combined (can accept any standard mirror), or as a diagnosing light.  White light tip won’t shut off until you repress the on/off switch.

•    Mirror white light tip illuminates directly to your standard mirror head for a superb prognosis.

•    Blue combined with UV light is a possibility too.
•    More Tips are available. Please contact us for more information.
•    All tips obtain powerful ‘high-brightness series’ light emitting diodes (LEDs) of latest technology, placed at tip head and acting directly on the material to be cured.  Approximately 1200 mW/cm2.
•    All Tips Autoclavable (135°c).
•    Tip Weight: 14gr / Length: 60mm

Handpiece
•    HandPiece contains energy for at least 25 minutes of use per charge (120 x 10 second cycles) illumination
•    Full recharge in ~3 hour
•    Cordless operation
•    Completely sealed, with touch sense ON/OFF switch for cold sterilization.
•    Noiseless and air emission free
•    Weight: 40gr / Length: 150mm / 15mm in diameter

Charger
•    Desktop sleek design
•    Electric Specs:  Input, two versions – 110/220 Vac
•    Output induction charging

Operation at a glance

rabo LED curing light handpiece
•    ON/OFF touch key – Activates device and starts or disrupts the 10-second curing cycle.

Battery charger light indications on Handpiece
•    Flashing green (only indicated when rabo handpiece is inserted into the charger) – rabo unit is still in re-charge process.
•    Continuously green (only indicated when rabo handpiece is inserted into the charger) – rabo unit is fully re-charged and ready for operation
•    Flashing red – rabo battery is five minutes to end of discharge cycle.

——– Rabo specifications ——–

Handpiece    Data
Handpiece Weight    40 gram
Handpiece Length    14.9 cm
Battery source    3 x 1.2 NiMH rechargeable battery
Charging time    4½ hrs

Tips
7mm standard tip    3mm Veneer and Ortho tip    9mm wide    Bi color uv-blue tip    White light mirra-tip
Curing wavelength    460±10 nm    460±10 nm    460±10 nm    460±10 nm / 400±10 nm    Cool white
Curing light power    Approx. 1200mW/cm2    Approx. 1200mW/cm2    Approx. 1200mW/cm2    Approx. 1200mW/cm2
Exposure sequence    5s @ 50%
10s @ 100%    3s @ 100%    5s @ 50%
10s @ 100%    10s @ 100%    continuous
Tip Length    14.2 mm    14.2 mm    14.2 mm    14.2 mm    14.2 mm
Tip Weight    60 gram    60 gram    60 gram    60 gram    60 gram
Full discharge duration    150 cycles    150 cycles    70 cycles    70 cycles    ~3 hrs

Reviews

There are no reviews yet.

Be the first to review “Rabo LED curing light”

Your email address will not be published. Required fields are marked *